Heat Pack

Instructions for Tropical Fish Transportation

1. Select a suitable foam insulation box.
2. Place the oxygenated sealed fish bag into the insulation box.
3. Wrap the transport heating pad with a towel or place a heat insulation pad, then position it on or above the fish bag.
4. Fill the gap with material, cover the foam box lid, and open 2-4 holes (with diameters of about 2 cm) on the box lid or the side of the box near the heating pack.
   • Important: Do not block the holes with the heating bag.
5. Install a suitable paper delivery box and make a few small holes to ensure airflow.

Other Animal Transportation

Suitable for:

• Mammals
• Birds
• Cold-blooded reptiles
• Insects

Steps:

• Choose an incubator or a suitable express box depending on the type of animal.
  • Cold-blooded reptiles and insects: Generally prefer incubators.
  • Mammals or birds: Select an incubator or courier box based on the animal's specific conditions.

How to Use:

1. Open the heat pack bag and wrap it with a towel.
2. Place the wrapped heat pack under or on the side of the pet box.
3. Fill the gap with soft material.
4. Create box openings near the location of the heating pack to allow airflow.
5. Make holes in the outer box according to the oxygen needs of the animal.
   • Tip: Keep the holes minimal while ensuring sufficient airflow to maintain the temperature inside the box.

Precautions

1. Avoid prolonged contact with animals, plants, or human skin to prevent low-temperature burns.
2. Do not ingest. If swallowed accidentally, rinse the mouth with water immediately and seek medical attention.
3. Thermal insulation measures are mandatory. Direct exposure to cold environments will accelerate heat loss, shorten usage time, and reduce thermal efficiency.
4. The heating principle relies on the redox reaction of iron when exposed to oxygen in the air. Ensure airflow in the courier box during use.

Application

• Live transportation of fish, climbing pets, other animals, and plants.
• Heat preservation.

Storage

• Avoid direct sunlight.
• Store in a cool, dry place.
• Keep out of reach of children.

Materials

• Iron powder
• Water
• Activated carbon
• Vermiculite
• Water-absorbing resin
• Mineral salts